PCI system solutions for the refurbishment of floors for direct use
PCI comes up trumps – product systems "Refurbishment, renovation and modernization" as part of the PCI annual campaign 2024
24.06.2024
As part of its annual campaign for refurbishment, renovation and modernization, PCI Augsburg GmbH is presenting two further system solutions with systems for the refurbishment of floors for direct use. These are for commercial and private indoor floor areas and the renovation of outdoor garage and balcony floors.
The focus of the annual campaign "PCI comes up trumps - how winners renovate" is on various system solutions with harmonized products for renovation, refurbishment and modernization. Craftspeople benefit from reliable complete solutions with which even demanding refurbishment tasks can be completed easily and reliably. The fourth focus of the annual campaign is the refurbishment of floors for direct use in the interior and exterior. This includes the refurbishment of commercial floors that are exposed to high mechanical loads - such as warehouses and workshops - and floor surfaces in private rooms as well as the refurbishment of garage and balcony floors.
System of floor coatings for direct use
This system is for direct use in dry indoor areas. It is particularly suitable for areas subject to heavy traffic, e.g. high traffic loads, and ensures a reliable, load-bearing and wear-resistant substrate. Thanks to the self-leveling properties, the products can be applied with little effort. Due to the fact that an additional top layer is not necessary, craftspeople save both time and money on the construction site. Sealing with PCI Zemtec Top provides additional surface protection.
Refurbishment of garages and outdoor floors
Whether due to mechanical stress from traffic, heat and frost, moisture, de-icing salt or oil deposits - unsealed screed or concrete floors inevitably suffer damage over time.
This system allows the renovated floor to be used directly in outdoor areas exposed to weather conditions as well as in temporarily damp or wet indoor areas. Thanks to its resistance to weathering, de-icing salt and permanent moisture, it is particularly suitable for permanent outdoor use. It can be used on slopes of up to 2 %, the gradient is maintained. With this system solution, craftspeople also benefit from time and cost savings on the construction site as no additional top layer is required. If a separate surface protection is required, PCI Zemtec Protect can be used for impregnation which also makes cleaning easier. This system solution does not require the use of reactive resins and is therefore sustainable.
Interested parties can find more detailed information on this topic on the PCI landing page „Floor Refurbishment“ as well as in the PCI brochures „Reliable Building Renovation“ and „Floor Refurbishment - On a Firm Footing“.
"Whether indoors or outdoors, whether there is time pressure or whether the existing floor is only being partially repaired: PCI offers a reliable solution for every substrate and every workstep. PCI products for floor renovation are easy to apply, can be walked on and covered quickly and are also suitable for direct use. This allows craftspeople to master every flooring challenge step by step and save time and money at the same time. Another benefit: PCI's solutions are very low-emission and therefore contribute to sustainability and healthy building and living," says Fabian Ladenburger, Head of Marketing Building Materials & Tiling Trade.
System of floor coatings for direct use
This system is for direct use in dry indoor areas. It is particularly suitable for areas subject to heavy traffic, e.g. high traffic loads, and ensures a reliable, load-bearing and wear-resistant substrate. Thanks to the self-leveling properties, the products can be applied with little effort. Due to the fact that an additional top layer is not necessary, craftspeople save both time and money on the construction site. Sealing with PCI Zemtec Top provides additional surface protection.
- Primer: PCI Gisogrund 404 (special adhesive primer for absorbent and non-absorbent substrates)
- Floor leveling: PCI Zemtec 1K (cement floor leveling for residential and commercial construction), alternatively PCI Zemtec 180 (flowable screed ready-mixed mortar for directly usable cement screeds)
- Top sealing: PCI Zemtec Top (2-component aqueous PU sealing for PCI Zemtec floors)
Refurbishment of garages and outdoor floors
Whether due to mechanical stress from traffic, heat and frost, moisture, de-icing salt or oil deposits - unsealed screed or concrete floors inevitably suffer damage over time.
This system allows the renovated floor to be used directly in outdoor areas exposed to weather conditions as well as in temporarily damp or wet indoor areas. Thanks to its resistance to weathering, de-icing salt and permanent moisture, it is particularly suitable for permanent outdoor use. It can be used on slopes of up to 2 %, the gradient is maintained. With this system solution, craftspeople also benefit from time and cost savings on the construction site as no additional top layer is required. If a separate surface protection is required, PCI Zemtec Protect can be used for impregnation which also makes cleaning easier. This system solution does not require the use of reactive resins and is therefore sustainable.
- Leveling of floors/walls: PCI Nanocret R4 PCC (high-strength repair mortar for concrete components on floors, walls and ceilings)
- Repair mortar: PCI Repafast Fluid (flowable repair mortar for traffic areas and industrial floors)
- Primer: PCI Gisogrund 404 (special adhesive primer for absorbent and non-absorbent substrates)
- Coating: PCI Zemtec Outdoor (cementitious coating for residential and commercial construction), optional PCI Farbchips 05 (plastic color flakes for scattering in floor coatings)
- Impregnation: PCI Zemtec Protect (2-component aqueous silicate impregnation for mineral floors)
Interested parties can find more detailed information on this topic on the PCI landing page „Floor Refurbishment“ as well as in the PCI brochures „Reliable Building Renovation“ and „Floor Refurbishment - On a Firm Footing“.
"Whether indoors or outdoors, whether there is time pressure or whether the existing floor is only being partially repaired: PCI offers a reliable solution for every substrate and every workstep. PCI products for floor renovation are easy to apply, can be walked on and covered quickly and are also suitable for direct use. This allows craftspeople to master every flooring challenge step by step and save time and money at the same time. Another benefit: PCI's solutions are very low-emission and therefore contribute to sustainability and healthy building and living," says Fabian Ladenburger, Head of Marketing Building Materials & Tiling Trade.
Downloads
-
Press release
