PCI Apoflex® W
Polyurethane waterproofing
for areas exposed to water and chemical attacks
Areas of application
- For indoor and outdoor use.
- For use classes A, B and C in accordance with the test principles to issue an official test certificate.
- For water exposure classes W0-I, W1-I, W2-I, W3-I in accordance with DIN 18534; DIN 18531-5 (balconies etc.); DIN 18535-3 (swimming pools and reservoirs).
- Waterproofing under ceramic tiles in wet areas, e.g. industrial kitchens, breweries, dairies, beverage industries, butcheries, cooling stores, paper mills, laboratories, hospitals, etc.
- Waterproofing under ceramic tiles in brine baths, hot springs a.o.
- Waterproofing of splash water reservoirs.
- Waterproofing of surfaces in building and civil engineering construction.
- Waterproofing under protective screeds.
- Coating of well drains and inspection chambers in waste disposals.
- On concrete, cement screed, render, gauged render, ceramic and stainless steel.
Important note: Effective August 24, 2023, an appropriate training must be carried out before use (applies only to EU countries).
More information on the training courses is available here www.pci-augsburg.eu/pu-product-training.
More information on the training courses is available here www.pci-augsburg.eu/pu-product-training.
Product features
- Crack bridging, covers cracks in the substrate which occur at a later stage.
- Chemical resistant to acids and lyes.
- Water impermeable, resistant to weather conditions, aging and temperatures, multi-use waterproofing indoors and out on walls and floors.
- Highly efficient due to easy workability.
- No fabric underlay required, therefore less labor and time required.
- Non-sag, flowable properties depending on the application.
- Very low emissions, GEV EMICODE EC1 Plus.
- With official test certificates.
Colors:
beige
Forms of delivery:
5-kg-pail
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
5-kg-pail
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
References
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet (SDS Apoflex® W)
Declaration of performance EN 14891 (RM O2P)
Sustainability data sheet
Everything impervious inside
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI Apoflex® W
Classification report EN 13501-1 (E)
Combined with product:
PCI Apoflex® W
