PCI Apoten® PU
PUR coating
for industrial floors subject to chemicals and mechanical loads
Areas of application
- For indoor and outdoor use.
- For producing wear-resistant and chemical-resistant coatings in all industrial areas.
- Crack-bridging, self-leveling coating on cementitious substrates and mastic asphalt.
- PCI Apoten PU can be mixed with silica sand, mixing ratio up to 1 : 0.3.
Important note: Effective August 24, 2023, an appropriate training must be carried out before use (applies only to EU countries).
More information on the training courses is available here www.pci-augsburg.eu/pu-product-training.
More information on the training courses is available here www.pci-augsburg.eu/pu-product-training.
Product features
- Highly wear resistant to mechanical loads from medium to heavy.
- Self levelling, highly efficient.
- Reliable bond to suitable substrates, therefore high final strength.
- Solvent free, no damage to environment and operative due to solvent vapors, no danger of fire or explosion.
- Anti-slip properties up to rating class R12/V6.
- Non-sag properties.
- Silicone free and emission reduced.
- Resistant to chemicals such as acids, alkalis, oil and grease (see table „Chemical Resistance“).
Colors:
similar to RAL 7030 Stone grey, stone grey, similar to RAL 7032 Pebble grey
Forms of delivery:
30-kg-set/ 24,60-kg-hobbock/ 5,40-kg-pail
Colors
Consumption calculator
Your Result
Quantity Required * approx
kg
equivalent *
30-kg-set
pieces
* 1: 0.3 filled with quartz sand** 24.6 kg hobbock base component+ 5.4 kg pail of hardener component
Your Result
Quantity Required approximately
kg
equivalent *
30-kg-set
pieces
*
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 13813 (SR-B1,5-AR1-IR4)
