PCI Carraflex®

Flexible thin-bed mortar

for natural stones

Technical data sheet

Flexible thin-bed mortar

for natural stones

Technical data sheet

Areas of application

Product features

Areas of application

For indoor and outdoor use.
For walls and floors.
For laying calibrated natural stones, especially white marble (e.g. Bianco-Carrara, Ajax, Arabescato) as well as Solnhofen stone and Jura marble in a thin adheisve bed.
On cement screed, rough-ground anhydrite screed, gypsum-based floated screed, concrete and precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fibre boards, dry screed, insulation boards, plaster slabs, plaster and old wall tiles and floor tiles.
For residential areas and business areas, basements, attics, hallways, kitchens, bathrooms, lavatories, staircases and base courses of buildings.
For ceramic tiles, flagstones and fully vitrified tiles if a white and polymer modified adhesive bed is required.

Product features

Polymer modified, guarantees excellent adhesion even to non-absorbent natural stones such as granites or quartzites.
Colour white, no staining from the adhesive bed with white marble if the installation is carried out in the combined method (buttering/floating).
Good workability, therefore easy to apply.
Effective crystalline water binding capacity.
Resistant to permanent wetness and frost, multi-purpose use indoors and out on walls and floors.
Temperature resistant from -20°C to +80°C.
Meets the requirements of C2 FT S1 in accordance with DIN EN 12 004.
Fast setting.
Fast curing, walkable and groutable after approx. 6 hours.

Colors: white

Forms of delivery: 25-kg-bag/ 5-kg-bag

Consumption calculator

Your specification

Notch

Area (m²)

Calculate now

Your Result

Quantity Required approximately

kg

corresponds

25-kg-bag

pieces

5-kg-bag

pieces

This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.