PCI Flexmörtel® Premium

Flexible tile adhesive

for ceramic tiles and natural stone

Technical data sheet

Flexible tile adhesive

for ceramic tiles and natural stone

Technical data sheet

Areas of application

Product features

Areas of application

For indoor and outdoor use.
For floors.
For covering a cement screed/cementitious heated screed ≤ 4% CM.
For laying tiles and natural stones.
Especially for the exterior.
For balconies, terraces, underfloor heating as well as industrial areas subject to mechanical stress such as halls, rooms and corridors in industrial buildings, markets, institutional buildings, administration buildings and commercial buildings.
For laying tiles on a cement screed, rough-ground anhydrite screed, heated screed, dry screed, mastic asphalt screed (only indoors) and on old floor tiles.
For leveling irregular substrates before tiling.

Product features

Convenient workability, processing time 90 minutes, walkable after 4 hours.
High security against efflorescence.
Non-sag properties, prevents heavy flagstones from sagging in the adhesive bed.
Consistency can be adjusted to produce a thin-bed mortar, flowable mortar or medium-bed mortar.
Adhesive bed thickness 1 - 20 mm.
Effective crystalline water binding.
Flexible, compensates variations in temperature and movements in the substrate.
Very low emissions, GEV-EMICODE EC 1 PLUS.
Meets the requirements of
- the guideline "flexible mortar" issued by Deutsche Bauchemie e.V. (German Building Chemicals Industry)
- the classification C2 FE S1 in accordance with DIN EN 12004.
All test certificates are available under www.pci-augsburg.eu.

Colors: grey

Forms of delivery: 20-kg-bag

Consumption calculator

Your specification

Notch

Area (m²)

Calculate now

Your Result

Quantity Required approximately

kg

corresponds

20-kg-bag

pieces

This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.