PCI Nanocret® R4 Fluid
Fluid mortar for structural repairs
ideal in case of high reinforcement density
Areas of application
- For indoor and outdoor use.
- For large-area structural repairs using formwork and grouting method.
- High-strength, flowable repair mortar for structural repairs in construction above and below ground.
- For columns, cross beams and piers of all types of bridges.
- For cooling towers, chimneys and other industrial facilities.
- For water and wastewater treatment plants, tunnels, channels and below-ground construction.
- For buildings in proximity to the sea or waters.
- For layer thickness from 20 - 200 mm.
Product features
- Single component.
- Long processing time.
- Self compacting, flowable or fluid consistency possible.
- Excellent flowability even in areas with narrow reinforcement.
- For concrete repair in one workstep up to a layer thickness of 200 mm.
- Can be extended with coarse aggregate for higher thicknesses.
- Freeze-thaw resistant.
- High carbonation resistance.
- Sulfate resistant.
- Low shrinkage.
- Fiber reinforced.
- No segregation or bleeding.
- For manual or mechanical application.
- Low in chromates and chloride free.
- Good strength development.
- Certified to EN 1504-3, class R4.
Colors:
grey
Forms of delivery:
25-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-bag
pieces
Your specification
Calculate nowYour Result
25-kg-bag
pieces
Your specification
Calculate nowYour Result
25-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Safety data sheet
Declaration of performance EN 1504-3 (R4)
