PCI Novoment® M3 plus
Ready-mixed, fast-setting screed mortar
for fast track cement screeds
Areas of application
- For indoor and outdoor use, also for direct use.
- For areas exposed to permanent wetness.
- For fast track bonded screeds and screeds installed on an isolating or insulating layer.
- Suitable for heated screeds.
- As repair mortar for concrete floors and cementitious screeds.
- For layer thickness from 20 to 80 mm.
Product features
- Can be tiled after approx. 3 days, walkable after approx. 1 day.
- Ready-to-mix mortar, no on-site mixing with sand required.
- Long processing time, can be worked with and smoothed for almost 1 hour despite of short curing time.
- Suitable for application by pump, even at higher temperatures.
- Temperature resistant from -30 °C to +80 °C, therefore suitable for balconies, terraces, garages, industrial floor coverings cleaned with superheated steam.
- Insensitive to moisture, therefore suitable for areas exposed to permanent wetness.
- Limited bending, it is therefore possible to reduce layer thickness to 30 mm for screeds on insulation layer (point load ≤ 2 kN or area load ≤ 3 kN/m²), in case of heated screeds the pipes must be covered by a layer thickness of 30 mm.
Colors:
Grey
Forms of delivery:
25-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
References
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 13813 (CT-C25-F4-A12)
Sustainability data sheet
On the floor, get set, go! PCI Novoment fast-setting screed mortars
MED EC Type Examination Certificate Marine Equipement directive (EU) 2022/1157 item No. MED/3.13
Combined with product:
PCI Novoment® M3 plus
Declaration of Conformity Marine Equipement Directive 96/98/EC Item A1/3.13
Combined with product:
PCI Novoment® Z1, PCI Novoment® M3 plus
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI Novoment® M3 plus
MED EC Certificate of Conformity Marine Equipment Directive 2014/90/EU Item No MED/3.13, MED/3.18a, MED/3.18c
Combined with product:
PCI Nanolight®, PCI Novoment® Light, PCI Durapox® Premium Multicolor, PCI Durapox® Premium, PCI Flexmörtel® S2, PCI Nanofug® Premium, PCI Epoxigrund Rapid, PCI STL 39, PCI VG 2, PCI Durafug® NT, PCI Durapox® NT plus, PCI Durapox® NT, PCI Gisogrund® 404, PCI Epoxigrund 390, PCI Seccoral® 1K, PCI Periplan® Extra, PCI Novoment® Z1, PCI Novoment® M3 plus, PCI Carraflex®, PCI Carraferm®, PCI Novoment® M1 plus
