PCI Repafast® APS 40
3-component repair mortar down to -25 °C
for traffic areas and industrial floors
Areas of application
- For indoor and outdoor use.
- For the repair of concrete surfaces and cement screeds.
- Fast repair of surfaces exposed to traffic with high mechanical loads.
- Repair of runways at airports.
- Repair of bridge decks and roads.
- Repair work in cold storage houses.
- Floors in the food industry.
- Repair of floors in petrol stations.
- Repair of crane runways.
- For layer thickness from 8 to 30 mm.
- Components B for different temperature ranges:
- Comp BF from -25 °C to 0 °C
- Comp B from 0 °C to +20 °C
Product features
- 3 components.
- Easy to apply.
- No primer required.
- High early and final strength.
- Can be applied even at very low temperatures (down to -25 °C).
- High chemical resistance.
- Good adhesion to concrete.
- Resistant to frost and frost/de-icing salt.
- Impact resistant and viscous.
- Resistant to moisture.
- Resistant to abrasion.
- Low odor development.
- Tested in accordance with EN 13813 SR-B2, 0-ARO, 5-IR8.
- Approved for appliation in the food industry.
Colors:
Comp. B violet/ A yellowish/ C grey, violet, yellowish, grey, Comp. BF violet/ A yellowish / C grey
Forms of delivery:
25,30-kg-set/ 0,40-kg-cartridge/ 2,40-kg-canister/ 22,50-kg-pail
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25,30-kg-set
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet (SDS Repafast® APS 40)
Declaration of performance EN 13813 (SR-B2,0-AR0,5-IR8)
Classification report EN 13501-1 (A2fl-s1)
Combined with product:
PCI Repafast® APS 40
