PCI Repaflow® EP plus
3K, epoxy performance grout
heavy duty, for dynamic loads
Areas of application
- For indoor and outdoor use.
- For floors.
- Grouting and bedding of machines, bridge bearings and pillars.
- Electrically isolated grouting of railway tracks.
- Precision grouting and bedding of crane rails and turbines.
- Grouting of guide rails and guardrail posts, pillars in hall and shelving construction.
- Grouting of voids and gaps.
- Force-transmitting bond of concrete with concrete and concrete with metal.
- Repair of heavy-duty floor surfaces.
Product features
- Three components.
- Ready to use.
- Self levelling.
- Low shrinkage.
- High bond to concrete and steel.
- High tensile strength and compressive strength.
- High resistance to impact and vibrations.
- Chemical resistant.
- Electrical isolation.
- Water impermeable up to 1.5 bar from 10 mm layer thickness.
- For grouting heights from 10 to 100 mm.
- Consistency can be adjusted from flowable to non sag depending on the application.
Colors:
Comp. A yellow/ comp. B brown/ comp. C grey, yellow, brown, grey
Forms of delivery:
114,90-kg-set/ 11,35-kg-pail/ 3,55-kg-pail/ 25-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
114,90-kg-set
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 1504-6
Classification report EN 13501-1 (Efl)
Combined with product:
PCI Repaflow® EP plus
