PCI Visconal®
Protective coating
for waterproofing storage rooms for fuel oil
Areas of application
- For indoor use.
- For walls and floors.
- For coating surfaces made of concrete, render/plaster and screed for collecting trays and rooms for fuel oil EL (common fuel oil), unused combustion engine and motor vehicle gear oils, mixtures of saturated and aromatic hydrocarbons with an aromatic content of ≤20% by mass and a flash point of >60°C as well as for oils that can be assigned to the afore-mentioned mixtures (e.g. certain transformer and hydraulic oils).
Product features
- Protects the groundwater, durably waterproofs collecting trays and rooms for fuel oil EL, diesel fuel with ≤ 0.5% organic fraction and transformer oil.
- Bridges cracks up to a width of 0.2 mm arising in the substrate at a later stage.
- Easy to clean, leaked fuel oil EL and transformer oil can be easily vacuum-cleaned or wiped off from the PCI Visconal coating without leaving any residues.
- Temperature resistant, multi-purpose use for collecting trays in the interior as mentioned above.
- Officially tested in accordance with the building and test principles for water protection coatings issued by Deutsche Institut für Bautechnik Berlin (German Institute for Building Technique Berlin), by Institut für Massivbau und Baustofftechnologie (Institute for Solid Building and Building Material Technology) at the University Karlsruhe.
Colors:
grey, red
Forms of delivery:
5-l-pail
Consumption calculator
Your Result
Quantity Required approximately
l
corresponds
5-l-pail
pieces
Your Result
Quantity Required approximately
l
corresponds
5-l-pail
pieces
Your Result
Quantity Required approximately
l
corresponds
5-l-pail
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet
