PCI Carrament® white
Medium-bed mortar
for natural stones and fully-vitrified coverings
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For laying natural stone slabs (also free length).
- For laying large-format fully-vitrified flagstones.
- For leveling irregular substrates before laying tiles.
- PCI Carrament grey also suitable to lay clinker bricks in sewage construction.
- On stairs and dados of houses, in living areas, on electric underfloor heating systems, heated screeds, balconies and terraces, in halls, rooms and corridors of industrial buildings, markets, institutional, service and administration buildings.
Medium-bed mortar PCI Carrament white
Product features
- Creamy, workable bedding mortar, the medium-bed mortar is spread using an appropriate notched trowel (medium-bed trowel).
- Flexible, compensates fluctuations in temperature and expansions in the substrate.
- Good adhesion to concrete, cement screed and render without pre-wetting or priming.
- Effective crystalline water binding capacity, therefore especially suitable for large-format ceramic flagstones.
- Low shrinkage, no tensions caused by shrinkage even with large mortar bed thicknesses (up to 4 cm).
- Resistant to permanent wetness and frost, multi-purpose use indoors and out, on walls and floors.
- Fast setting, reduces penetration of moisture into the material during the installation thus preventing efflorescence.
- Fast curing, walkable and groutable after approx. 6 hours, able to bear weight after approx. 1 day.
- No staining from the adhesive bed on white marble when using the combined method (buttering-floating).
- Meets the requirements of C2F in accordance with DIN EN 12004.
- All test certificates are available under www.pci-augsburg.de.
Colors:
white
Forms of delivery:
25-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
Building pros also use:
PCI Carraflex®
Flexible thin-bed mortar for natural stones
PCI Carrafug®
Special joint grout for natural stone slabs
Matching product systems
More product systems
System for Multi-Use Natural Stone
Versatile laying system, very low in emissions, for all natural stone coverings in interior applications
System for Road Paving
System for laying and grouting paving subject to moderate or high mechanical loading
System for Civil Engineering
System for setting and installing manhole rings and surrounds and for the refurbishment of walk-in sewers and sewage system structures
System for Garden Wall
System for attractive, durable garden walls
System for Paving
for the rigid laying of paving stones subject to moderate loading in domestic environments
System for Slabs
for the rigid laying of natural stone, concrete and ceramic slabs subject to moderate loading in domestic environments
System for Plinth and Paving
This system describes the interface between paving/paving slabs and the building plinth
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 12004 (C2F)
Sustainability data sheet
Natural talents: The PCI Carra line
PCI Landscape Gardening
Classification report EN 13501-1 (A2fl-s1)
Combined with product:
PCI Carrament® white
Classification report EN 13501-1 (A2-s1,d0)
Combined with product:
PCI Carrament® white
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI Carrament® white
